How to quickly and easily wash ceramic floors and walls

For the aesthetic appearance of the tiled floor, daily wiping is often not enough. First of all, the problem concerns the kitchen and the bathroom. Lined surfaces, whether ceramic, marble or granite are not capricious in operation and do not require special attention. But for impeccable purity and gloss you have to make physical efforts.

Systematic care greatly simplifies cleaning activities to restore the original appearance of the ceramic coating. A vacuum cleaner or a broom will remove large particles, like crumbs or sand brought from the street, and this will protect the frosting from scratches. On a clean plane, the process of removing stains and cleaning tile joints will not be so laborious.

In theory, the universal set of the hostess should consist of:

alkaline products - for thorough cleaning;
composition with acid - for obsolete stains;
solvent - for use in complicated areas (stains of paint, wax, etc.);
soft rags and sponges;

So, to the point. We put on gloves and get to work

From simple to complex

First, try to rinse greasy spots and traces of drops with gel for dishes or soapy water. The scheme is primitive: sponge - detergent composition - several circular movements. Leave the foam literally for one or two minutes and rinse thoroughly. If your efforts are ignored, we proceed to a chemical attack.

To the question "how to efficiently and quickly mop the floor", erected rows of shop windows eloquently answer. First you should study the instructions on the jars and bottles, as there are many nuances.

Firstly, do not rely on the practicality and high operational capabilities of the floor, and test different products on the tiles. Powders with sand will quickly spoil the protective coating. Cleaning peeling gels lead to microcracks on the glaze, although abrasive particles will ensure sterile cleanliness. A radical decision comes with a disappointing bonus. Damaged "immunity" of the decorative layer will not resist the penetration of dirt, and the floor will become dirty with the speed of spread of viruses.

Secondly, matte tiles require special emulsions and wax mastic for color brightness.

Thirdly, if you wash the floor, for example, with a plumbing product containing chalk, you will have to get rid of stains for a long time.

Creamy formulations, liquids and powders are the focus of hostesses. LOC, Sif, SARMA, Sanoks, Santri are the leaders among customer inquiries. Amway and Silit-Bank are slightly inferior in aggression. So that the gloss does not suffer, it is better to turn the powders into a thick slurry, and distribute the mass evenly over the surface with a sponge or brush. With a dipped finger, it is easier to distribute the mass along the lines of the joints.

Two in one - a universal formula for glass and mirrors. In addition to direct use, the universal mix will relieve fresh spots and provide shine to the tiled floor. Ideal for daily cleaning. Spray the composition and go get a coffee. Cheering up, feel free to wash off gray stains, without putting extra effort into wiping off individual fragments.

Maybe try chlorine? At the same time, we disinfect the tile and whiten the faded grout a little. We dilute any kind of Domestos bleach with water, about 1: 1 and fill it with a fragrant “cocktail”.

In order not to damage the top layer, abundantly wet the surface and spray the composition on top. A few minutes is enough to get rid of mold spores in the bathroom and lighten the seams for a tone. The floor will have to be washed several times in order to avoid dull stains, for which a tool is also provided. It’s nice to add a couple of tablespoons of vinegar to the bucket. It will beat off the pungent smell and give shine. Caustic chlorine has an alternative - liquid for tiles, successfully coping with such problems.

Green alternative

Many companies have begun to equal European manufacturers and, having taken care of the health of the nation, produce a series of safe products. For example, "Eco House" offers products for the gloss of glass with microparticles, exemplary coping with dirt on any enamel. An effective formula will create a barrier to absorption from the outside, which ensures purity for a long time. At the same time, it definitely does not cause a reaction in allergy sufferers. A series of environmentally friendly chemicals is added by Citri Glow or Life Ttee and other brands that do not contain chlorine and harmful fragrances.

Diluted cleaning, and jars of household chemicals over? A good moment to once again recall a safe alternative. The versatility of soda will allow you to wipe away not only ingrained drops, but also refresh the puffer in the gaps. And in order not to scratch the coating, spread the alkali on a wet surface. It will quickly dissolve the dirt in the water, and you just have to collect the dark streaks with a rag. Caustic (technical) soda is considered a thermonuclear agent.

Use the folk formula. In 7 glasses of water add ½ tbsp. soda, a couple of spoons of lemon juice and vinegar. The solution for high-quality cleaning is ready! Wear gloves and apply the composition with a toothbrush along the grout lines. After 10 minutes, you need to wash it.

Vinegar and water in equal proportions will cope with the task no worse. The liquid is sprayed on a wet surface, and the floor is treated with a soft brush with the repetition of subsequent steps.

Another version of homemade preparations: 200 ml of water and 100 ml of hydrogen peroxide. Do not forget that the success of cleaning is in a dry surface. Microfiber structures and a terry cloth perfectly absorb water, provide shine and firmly fix the result.

The problem of dirty tile joints is familiar to all fans of tile floors. Gray lines significantly degrade the aesthetics of the room. Dilute a special tool - 1: 4. Apply the mix to the seams with a sponge or brush. Rub lightly and leave to soak. After 15 minutes, finish the process, and dry the clean surface with a rag. This method is also effective for colored grouts. Lacquered gaps and natural textures like marble or granite lose their luster after a chemical “cocktail” gets on them. Therefore, draw the right conclusions.

It is allowed to use bleach with a product from a series of "peeling" if the seams are not covered with sealant. Combine the two formulas and use a toothbrush or gloved finger to spread the paste along the seam line. To remove a deep stain, leave a mixture of soda and gel overnight.

Down with the detergents! Classified groups also have an alternative. This is a melamine sponge made up of colorless crystals. When in contact with water, a special foam is released that is easily removed with a dry cloth. Like a soft eraser, it erases any dirt from any texture without using a chemical formula.

A steam generator or vacuum cleaner with such a device will protect you from unpredictable reactions. Using the technique, it will be possible to compare the radiant result with a picture in a magazine advertising cleaning products.

Some tips

Before you start working in the bathroom, open the hot water and pretend the door. Drops of steam will settle on cold ceramics and greatly facilitate the process.

take care of a respirator in order to avoid allergic reactions to chemical components.
it is unreasonable to simultaneously distribute the product over the entire surface. Dried foam and soap scuffs wash off worse than dirt.
To avoid gray patterns, tiles are washed off with a rag, and wiped in the opposite direction.
bleach tile joints with hydrogen peroxide. Treated gaps are not washed off.
wipe glossy tiles with vinegar, matte - with mastic.

Each hostess, having tested several versions, will choose an appropriate cleanliness formula for herself. Do not use solvents and compositions with a high concentration of acid or alkali, otherwise the decorative effect of the floor will disappear from aggression.